I am hoping someone can offer some insight into this.
A while back, the bike developed a bit of a whine whenever the clutch lever was pulled, there was also a small but noticeable pulse while riding in the friction zone.
A recent misfortune involving roadworks, stones, and a radiator has the bike up on the table and while the fairing is off, I thought it best to have a look at the clutch assembly.
And here is the problem, or possibly part of it, the Pull Rod(#46102) is nicely chewed up and the Release Lever(#13102) also looking a little bit shabby.
eahQ5rm.jpg
315fh6b.jpg
What causes this? Is it just these parts failing and in need of replacement, or a symptom of another problem?
When replacing these should I, as a matter of course replace anything else, needle bearings etc.
The bike is on 22000 kms, and prior to this, the clutch has not been opened.
6FdaFIB.jpg
A while back, the bike developed a bit of a whine whenever the clutch lever was pulled, there was also a small but noticeable pulse while riding in the friction zone.
A recent misfortune involving roadworks, stones, and a radiator has the bike up on the table and while the fairing is off, I thought it best to have a look at the clutch assembly.
And here is the problem, or possibly part of it, the Pull Rod(#46102) is nicely chewed up and the Release Lever(#13102) also looking a little bit shabby.
eahQ5rm.jpg
315fh6b.jpg
What causes this? Is it just these parts failing and in need of replacement, or a symptom of another problem?
When replacing these should I, as a matter of course replace anything else, needle bearings etc.
The bike is on 22000 kms, and prior to this, the clutch has not been opened.
6FdaFIB.jpg
Clutch whine advice.
Aucun commentaire:
Enregistrer un commentaire